HP Unified Wired-Wireless Networks and BYOD (H8D05S)
COURSE OVERVIEW
The transition to Bring Your Own Device (BYOD) solutions and provisioning the right supporting infrastructure to support those solutions can present your team with significant challenges.
COURSE DESCRIPTION
The new HP Unified Wired-Wireless Networks and BYOD course provides HP Partners with the skills and knowledge to design and implement a BYOD solution using Intelligent Management Center (IMC) software and the HP Unified Wired and Wireless controller. You will build a proven, secure BYOD solution to host guests and employees who bring unknown devices into your corporate wireless network. Whether enabling mobility across the campus or the globe, HP’s unified wired and wireless solutions provide you with a single optimized and scalable unified network for secure and consistent access to business critical applications.
This course is approximately 60% hands-on labs and 40% lecture and learning activities.
The HP Unified Wired-Wireless Networks and BYOD course prepares candidates for one of the specialty exams in the HP ASE FlexNetwork Architect V2 and soon-to-be-released HP ASE – FlexNetwork Integrator V1 certification within the HP ExpertOne program.
PREREQUISITES
HP ATP – FlexNetwork Solutions V1 or HP ATP – FlexNetwork Solutions V2
AUDIENCE
HP Partners with three or more years of experience in designing and implementing enterprise level wireless networks. General knowledge of network management software, and specifically, IMC, is highly recommended.
WHAT IS NEW?
The HP Unified Wired-Wireless Networks and BYOD course is a new course, and is one of the electives in the new HP ASE – FlexNetwork Architect V2 and soon-to-be-released HP ASE – FlexNetwork Integrator V1 certification tracks.
COURSE OBJECTIVES
After completing this course, you will be able to:
- Describe the components of the HP FlexNetwork architecture
- Configure an HP Unified Wired-WLAN switch
- Describe the 802.11 standards and techniques used to propagate wireless transmissions
- Describe specific radio properties that you should understand when implementing a wireless network
- Respond to and mitigate threats of intrusion that exists in a wireless medium through establishing a security posture with strong authentication, privacy, and data integrity
- Upgrade and manage the licenses of the HP Unified Wired-WLAN controllers
- Describe and troubleshoot the AP discovery process and AP management
- Implement load balancing of clients
- Configure an appropriate AC redundancy solution
- Establish a guest solution utilizing HP portal authentication
- Describe WLAN optimization and troubleshooting solutions
- Explain the benefits of WSM and EAD as part of an overall IMC deployment tool
- Understand the foundation of the HP BYOD solution
- Differentiate BYOD from simple authentication (802.1x, Mac or Web authentication)
- Define UAM installation requirements and options
- Understand and configure the step by step BYOD installation and configuration process including:
- Onboarding of guest endpoints
- Portal redirection
- Registration process for user endpoints
- Different ways of guest account creation
- Guest access for corporate user’s personal endpoints
- 802.1X authentication for corporate endpoints
- Automation of endpoint configuration
- Distribution of certificates for EAP-TLS authentication
CERTIFICATION(S) AND EXAM(S)
Certification(s)
- HP ASE – FlexNetwork Architect V2
Exam(s)
- HP2-Z33 – HP Unified Wired-Wireless Networks and BYOD
For more information about HP training programs in Ukraine visit http://www8.hp.com/ua/ru/training/index.html
Getting Started with HP Wireless Networks (HL043S)
COURSE OVERVIEW
The Getting Started with HP Wireless Networks training helps network technicians understand the wireless concepts they need to know before attending Building SMB Networks with HP Technologies (ILT). Specifically, the course focuses on the 802.11 standards used to implement wireless networks and the security options used to protect wireless access and transmissions. With these concepts in mind, you will also be better prepared to continue your certification training by attending the Building SMB Networks with HP Technologies (ILT) course.
In addition, this course introduces network technicians to various ways of how wireless networks can be design, such as controller based wireless networks or wireless networks existing of standalone Access Points (APs).
AUDIENCE
IT Professionals who deploy SMB solutions based on HP products and technologies, including HP Reseller Systems Engineers, Customer IT Staff, HP System Engineers and HP Services Field and Call Center Support Engineers.
WHAT IS NEW?
This revision of the Getting Started with HP Wireless Networks WBT has the same high level topics at the revision 10.41. However this version going into more detail in areas like security and the new Comware based wireless controllers.
PREREQUISITES
- none
EXAM(S)
- HP0-Y46 – Implementing HP Network Technologies
- HP2-Z26 Fast Track – Implementing HP Network Technologies
COURSE OBJECTIVES
After completing this course, you will be able to:
- Explain the different 802.11 standards, including:
- 802.11a/b/g/n
- Association process
- SSID and BSSID
- 802.11i
- Understand the basic radio technologies, such as data rates, basic rates, and throughput
- Understand the various security options, including:
- WEP
- WPA/WPA2
- 802.1X
- Web authentication
- MAC authentication
- Explain the different wireless LAN architectures:
- Standalone
- Centralized
- Optimized WLAN
- Explain the products required for either an SMB or Enterprise wireless solution
CERTIFICATION(S)
HP ATP –FlexNetwork Solutions V1
For more information about HP training programs in Ukraine visit http://www8.hp.com/ua/ru/training/index.html
HP Enterprise Wireless Networks (HL047S)
COURSE OVERVIEW
The HP Enterprise Wireless Networks course provides learners with the skills and tools to successfully plan, design, implement and troubleshoot enterprise level HP wireless networks, including how to integrate into the existing wired infrastructure.
The HP Enterprise Wireless Networks course provides in-depth training on wireless enterprise solutions based on mobility traffic management and wireless traffic prioritization. In today’s large enterprises, the wireless network is expanding both in size and complexity. Planning and designing wireless networks is often oversimplified, but many factors must be taken into account, including RF coverage, access point placement, number of users, number of guests, and signal strength, among other variables. The HP Enterprise Wireless Networks course teaches students how to use HP RF Planner to overcome wireless network design challenges. Security is also a critical factor. The number one concern for the CIO’s with regard to wireless network implementation is security. This course goes into great detail on how to secure an HP Networking wireless solution from security threats using appropriate policies to ensure proper implementation of security standards.
What is new?
The HP Enterprise Wireless Networks course has been redesigned to focus on new solutions and more advanced topics. The new course is based on HP MSM solutions, whereas the previous version focused on the HP A-Series wireless products and solutions. The topics covered in the new HP Enterprise Wireless Networks course can be found in the Course Objectives section.
AUDIENCE
HP Partners, customers and employees who design, implement, and support enterprise level wireless network solutions based on HP MSM wireless products and solutions, including systems engineers, systems designers, customer IT staff, HP services field and call center support engineers.
CERTIFICATIONS AND RELATED EXAMINATIONS
- HP Master ASE – Network Infrastructure [2011]
- HP0-Y37: Migrating &Troubleshooting Enterprise Networks
PREREQUISITES
- HP ASE – Wireless Networks [2011] or CCIE – Wireless certification
COURSE OBJECTIVES
- Deploy and configure HP Networking wireless enterprise solutions
- Plan and design wireless projects with tools like RF Planner
- Design and implement advanced guest access solution with a Network Operations Center (NOC).
- Design, implement and use WLAN management tools within the PCM suite such as Mobility Manager
- Design, implement and use mobility traffic management solutions with Mobility Traffic Manager (MTM) with single and multiple MSM controllers
- Explain how to prioritize delay-sensitive traffic (QoS) in the complete path between a wireless device and the destination device
- Troubleshoot enterprise level features and solutions such as MTM, security related features and the quality of the wireless signal (Interference, 802.11b/g/n interoperability issues, optimizing wireless networks and wired network-related problems)
- Design, configure and deploy enterprise wireless security solutions, based on IPS/IDS.
NEXT STEPS
- Accelerated Migrating & Troubleshooting HP Enterprise Networks, Rev. 11.31 (HL040_00314301)
For more information about HP training programs in Ukraine visit http://www8.hp.com/ua/ru/training/index.html
Implementing & Troubleshooting HP Wireless Networks (H3K66S)
COURSE OVERVIEW
The Implementing and Troubleshooting HP Wireless Networks course provides learners with the skills and tools to successfully design, implement and troubleshoot SMB and small enterprise level HP wireless networks, including how to integrate into the existing wired infrastructure.
COURSE DESCRIPTION
In today’s mobile world, wireless networks are widely deployed in a majority of workplaces, including hospitals, retail shops, schools, and universities. Take the Implementing and Troubleshooting HP Wireless Networks course for a solid introduction to HP Networking’s wireless products and solutions. Important topics covered include 802.11 standards, Controller Teaming for high availability purposes, industry level wireless security technologies (WPA2, AES, etc.), as well as basic architectural design, implementation, and configuration of HP Networking wireless products.
The Implementing and Troubleshooting HP Wireless Networks course prepares learners to successfully deploy HP Wireless Networks and prepare for the HP Accredited Solutions Expert (ASE) certification within the HP ExpertONE program if needed.
PREREQUISITES
- HP AIS – Network Infrastructure [2011] or CCNP – Wireless certification
AUDIENCE
HP Partners, customers and employees who design, implement, and support wireless network solutions based on HP MSM wireless products and solutions, including systems engineers, systems designers, customer IT staff, HP services field and call center support engineers.
CERTIFICATIONS AND RELATED EXAMINATIONS
- HP ASE – Wireless NetworksImplementer V1
- HP0-Y44 – Implementing and Troubleshooting HP Wireless Networks
COURSE OBJECTIVES
After completing this course, you will be able to:
- Describe the HP Networking wireless products such as Access Points (AP’s) and Access/Mobility Controllers
- Perform initial setup and configuration of AP’s and controllers
- Understand the wireless fundamentals like, 802.11 standards, antennas, radios and Wi-Fi properties
- Identify WLAN security vulnerabilities and how to solve them with the available technologies such as WPA2, 802.1x with local or external RADIUS server
- Setup and configure basic Guest Access policies
- Implement high availability solutions by setting up Controller Teaming and Meshing
- Configure and setup Layer 2 and Layer 3 roaming
- Troubleshoot covered topics like, Controller Teaming, Client connectivity, Wireless Security with the help of wireless troubleshooting tools such as InSSIDer, Network Monitor or Omnipeek
NEXT STEPS
- HP Core/Distribution Network Technologies using ProVision Software, Rev. 10.41 (HK741_00646332)
For more information about HP training programs in Ukraine visit http://www8.hp.com/ua/ru/training/index.html