Deploying HP FlexFabric Core Technologies for Comware Based Devices (H4C88S)

Course overview

HP FlexNetwork is redefining the way organizations think about their data center network fabric; It is the industry’s most complete software-defined network fabric. This four-day course gives network administrators, and engineers an opportunity to plan for and implement networks utilizing HP FlexNetwork Architecture, using Comware devices. Participants will work HP IRF, along with open standard technologies like ACL’s, QoS, OSPF, BGP and Multicast technologies. The learner will experience both theory and hands on interaction using HP network devices through remote lab exercises over four days.

Course Description

This course will lead into more advanced topics within the HP FlexNetwork Architecture using the Comware operating system. The learner will experience both theory and hands on experience utilizing real hardware through lab exercises over four days. The learner will work with open standard technologies like Protocol Independent Multi-cast (PIM) in both Sparse and Dense mode along with IGMP, Open Shortest Path First (OSPF) with Multi-Area implementations, Border Gateway Protocol (BGP), also learn and work with Quality of Service (QoS) and Access Control Lists (ACLs), HP Intelligent Resilient Framework (IRF) and the Multi-Active Detect (MAD) technologies.

Prerequisites

The learner is should have completed one of the two courses below or obtained equivalent knowledge.

  • HP FlexNetwork Fundamentals(H4C81)
  • HP Comware Foundations training (Part number H4C87)
Audience
  • This course is designed for Network Administrators, engineers and consultants who plan to Deploy HP FlexNetwork Architecture using Comware devices
Course objectives

At the conclusion of this course, you should be able to:

  • Implement and deploy HP IRF with MAD technologies to protect your network
  • Implement, design and deploy Access Control Lists (ACLs)
  • Configure, design and deploy Open Shortest Path First (OSPF), in multi-area, and work with External routes
  • Implement, design and deploy Open Shortest Path First (OSPF), in multi-area design, and work with External routes
  • Implement, design and deploy Border Gateway Protocol (BGP)
  • Implement, design and deploy Quality of Service (QoS)
  • Implement, design and deploy Multicast (Protocol Independent Multicast Dense Mode and Spare mode) along with IGMP technologies
Benefits to you
  • Gain hands-on experience with HP FlexNetwork Architecture using Comware experience in a zero risk environment using real hardware. If you make a mistake you will not, incur any production outage in our lab environment which also means no higher ups asking what happened
  • Learn how to plan, design and implement HP Flex Network Architecture using HP Comware
  • Enhance your knowledge and comfort level with HP Flex Network Architecture running Comware in any deployment location within your network, from the Core to the Edge, and also the Spine and Leaf design
Course outline

Module 1 – Introduction

  • Course overview and objectives

Module 2 – IRF

  • Design an IRF virtual device for the core, distribution, or access layer
  • Implement and manage an IRF virtual device
  • Describe what a split IRF stack is and configure the mechanisms designed to detect and remedy this problem

Module 3 – Access Control Lists

  • Define ACL and identify the criteria by which ACLs select traffic
  • Configure ACLs on HP Comware based switches to select given traffic
  • Apply static ACLs to interfaces to meet the needs of a particular scenario
  • Examine an ACL configuration and determine the action taken on specific packets

Module 4 – Quality of Service

  • Need for QoS
  • Prioritization and queue scheduling
  • Traffic policing and shaping
  • Congesting avoidance
  • Voice VLAN and LLDP-MED

Module 5 – OSPF

  • Deploy HP products in single-area and multiple-area OSPF systems
  • Use area definitions and summaries to create efficient and scalable, multiple-area designs
  • Advertise routes to external networks in a variety of OSPF environments
  • Promote fast, effective convergence during a variety of failover situations
  • Use virtual links as required to establish nondirect connections to the backbone
  • Implement OSFP authentication

Module 6 - BGP

  • Establish and monitor eBGP sessions between your routers and Internet Service Provider (ISP) routers
  • Advertise an IP block to multiple ISP routers
  • Filter BGP routes as required for a dual-homed ISP connection
  • Configure a BGP router to advertise a default route in OSPF or to redistribute and aggregate BGP routes, as appropriate

Module 7 – Multicast

  • Route multicast traffic using Protocol Independent Multicast-Dense Mode (PIM-DM) or Protocol Independent Multicast-Sparse Mode (PIM-SM)
  • Select and configure rendezvous points (RPs) based on particular environmental needs such as redundancy and efficient operation
  • Minimize unnecessary multicast flooding
  • Apply advanced controls such as source-specific multicasting (SSM) and administrative scopes to a PIM-SM deployment

For more information about HP training programs in Ukraine visit http://www8.hp.com/ua/ru/training/index.html